http://panasonic-cordless-drills.blogspot.com/http://panasonic-cordless-drills.blogspot.com/ has been added as a Sitemap. Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver

Saturday, May 7, 2011

Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver

 

Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver

I was very sceptical even after reading glowing reviews. Have gone from sceptic to advocate since using impact. I already owned a Sears Craftsman 14.4V impact and was quite impressed with it but became interested in the ability to adjust the torque on this tool. Let me say that I LOVE this feature. Even though the instruction manual says not to use it on sheet metal, supposedly because the torque might strip screws, I haven't had any problem. I simply set the torque setting to 1 and the impact setting to Soft and the use the "one shot impact" setting and install whatever. I recently installed the electrical cover plate and front base cover to our new dishwasher. Also installed doors and roller freezer compartment on our new LG bottom freezer fridge and had no problem. Also removed and later installed 5 ash cabinet doors and barely stripped one screw which was probably stripped years ago by builder. Shaved 1/2 inch end of a toothpick, stuck it in the hole and zip, drove it home, snug and no strip. Used lowest setting on torque and impact for these small chores and tool made child's play out of it. Also use a magnetic hex extension to hold screws on bit with no hands(Sears sells one with extra strong magnet, it's great). Drove some 1 3/4 inch screws into some new wood and never got over level 3 on the tourque setting. Just experiment a little with the different torque and impact settings,they are push buttons so no collar or lock ring to fiddle with. This tool makes me look for chances to drive a screw. The manual is typically a little squirlley but the tool is just the opposite. It is serious.
I bought the combo kit on Amazon and the drill is great. I really like the ratcheting action on the keyless chuck.
My eyes have changed a little over time and I love the led light. You can engage it without engaging the driver motor if you use a light touch. This is great for me.

With this nifty little tool, you may never use a regular drill to drive screws again. The digital settings are easy to adjust, and an onboard microcomputer senses pressure to prevent you from overdriving and damaging the surface of whatever you are working on. The LED light is a nice touch in low light conditions. It is extremely light weight, but packs enough power to satisfy professionals as well as do-it-yourselfers. The driver won't bog down when pushed to it's limits, it just keeps plugging away, trying to further seat the fastener. Panasonic is a leader in the battery industry and the long battery life of the 3.5 amp packs on this tool are another plus. All in all, this is a supertool - extremely versatile, lightweight, great batteries and charger. -JodiJohnson

Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver Reviews :

I've been thinking about a cordless impact driver since they first hit the market a few years ago, but it was hard to justify when I have a Bosch 24 volt drill that will drive anything. Recently, however, I was driving lag screws in the confined space of a 105 degree attic as I was sistering new ceiling joists to the old ones. My wrist was about to fall off after the first joist. I borrowed a pneumatic impact driver from a friend, and it made the all the difference and convinced me that a cordless impact driver was a must. Turning to my favorite resource for tools, Amazon, I saw a killer deal on this Panasonic driver in combo with a drill and ordered it. It seems that the combo is not available now, but check Panasonic's website for rebates..they sometimes offer the drill body as a free promotion when you buy the impact driver.

Anyway, I love these tools! Like I said, my Bosch has the torque to drive anything, but it weighs a ton and so can be very difficult to handle unless you're working right in front of you...especially if you need to lean into it to driver a fastener without stripping the head. Not so with the Panasonic. It's very light and compact, and you only need to apply enough force to keep the bit in/on the fastener... the impact driver does the work of driving it. Some reviewers of other impact drivers have mentioned breaking off screw heads with their drivers, but the electronic clutch on this tool really works. You can set 11 (I think it's 11--don't have the tool in front of me) different torque levels, 3 different impact settings (soft, medium, hard), and there is a "one shot" feature that does just one impact when you pull the trigger and then it stops---great for snugging up a fastener. Once you've set the clutch, you pull the trigger and it spins until a little resistance is encountered, then the impact hammer goes to work, and finally the driver stops when it's reached the torque level you've set. If you're not happy with how the fastener is seated, it's easy to fine tune simply by feathering the trigger--it's very responsive. My only (very minor)complaint is that it's a little hard to make the bit turn slowly when you first pull the trigger, but I'm getting a better feel for it.

Reviews :

I was very sceptical even after reading glowing reviews. Have gone from sceptic to advocate since using impact. I already owned a Sears Craftsman 14.4V impact and was quite impressed with it but became interested in the ability to adjust the torque on this tool. Let me say that I LOVE this feature. Even though the instruction manual says not to use it on sheet metal, supposedly because the torque might strip screws, I haven't had any problem. I simply set the torque setting to 1 and the impact setting to Soft and the use the "one shot impact" setting and install whatever. I recently installed the electrical cover plate and front base cover to our new dishwasher. Also installed doors and roller freezer compartment on our new LG bottom freezer fridge and had no problem. Also removed and later installed 5 ash cabinet doors and barely stripped one screw which was probably stripped years ago by builder. Shaved 1/2 inch end of a toothpick, stuck it in the hole and zip, drove it home, snug and no strip. Used lowest setting on torque and impact for these small chores and tool made child's play out of it. Also use a magnetic hex extension to hold screws on bit with no hands(Sears sells one with extra strong magnet, it's great). Drove some 1 3/4 inch screws into some new wood and never got over level 3 on the tourque setting. Just experiment a little with the different torque and impact settings,they are push buttons so no collar or lock ring to fiddle with. This tool makes me look for chances to drive a screw. The manual is typically a little squirlley but the tool is just the opposite. It is serious.
I bought the combo kit on Amazon and the drill is great. I really like the ratcheting action on the keyless chuck.
My eyes have changed a little over time and I love the led light. You can engage it without engaging the driver motor if you use a light touch. This is great for me.


List Price:$498.00
Price:$330.41
You Save:$167.59 (34%)

Buy Cheap Panasonic EY7202GQW 12-Volt NiMH Cordless Impact Driver for Sale

No comments:

Post a Comment